4.730+ Google reviewsRated 4.7 out of 5 from 30+ Google reviews

Glass Pool Fencing Sydney

Frameless and semi-frameless glass pool fences, cut and toughened in our Seven Hills factory and installed within a week of measuring.

A Fields Glass glazier kneeling on a timber pool deck to tighten a stainless steel spigot under a frameless glass pool fence panel
  • Measure to install within a week
  • Glass cut and toughened in Seven Hills
  • Built to pass AS 1926.1 inspection
  • NSW licence 213531C
  • 35+ years glazing in Sydney
  • Fully insured, $20 million public liability
A Fields Glass glazier using a suction lifter to set a frameless glass pool fence panel into its spigots on a timber deck
Cut and toughened in Seven Hills

Fields Glass is a licensed Sydney glazier that makes and installs glass pool fencing from its own factory in Seven Hills. Every panel is cut, drilled and toughened in house, then installed as a frameless or semi-frameless pool fence with matching glass gates, built to AS 1926.1, the Australian Standard for pool barriers. Most fences go from measure to finished within a week.

  • Free measure and quote. We check levels, ground type and where the gate should go on site, then send you a written quote.
  • 10-year warranty on hardware and workmanship. If something we fitted isn’t right, we come back and fix it.
  • Ready for inspection. Heights, gaps, gate swing and latch position are set to AS 1926.1, so your fence is ready for your council or certifier.
  • One team, start to finish. The same team measures, makes and installs your fence, so there is one number to call.

Sydney Homeowners Trust Fields Glass

4.730+ Google reviewsRated 4.7 out of 5 from 30+ Google reviews
  • Quickly and easily got the job done. Very clean and tidy, very courteous and very much recommended for next time!

    Ashraf PirwaniGoogle review
  • Fields Glass have been doing our work for 15+ years with a wide range of different glass work, best in the business! Wouldn’t use anyone else!

    Evan GrahamGoogle review
  • Very happy with the service and prompt turn around. Brett was friendly, professional and efficient. Very satisfied with the job he did. Overall highly recommended.

    Suzanne TraceyGoogle review

Why Sydney Pool Owners Choose Fields Glass

  • Your glass is made here, not ordered in. We cut, drill and toughen pool fence glass at 9/13 Foundry Rd, Seven Hills.
  • Installed within a week. Because we don’t wait on an outside glass supplier, most fences are installed within a week of measuring.
  • A licensed glazier for 35+ years. NSW Licence 213531C. Glass is our trade, not a side line.
  • Built to pass inspection. Heights, gaps, gate swing and latch position are set to AS 1926.1 from the first measure.
Two Fields Glass glaziers lowering frameless glass pool fence panels into spigots beside a backyard pool

Why Making the Glass Ourselves Matters to You

Toughened glass can’t be cut or drilled once it has been toughened. Every hinge hole, every notch for a step and every odd-width panel that closes the last gap has to be made before toughening.

Fencing companies that order glass in wait on their supplier for each panel, and one wrong measurement sends it back to the queue. Fields makes the panels and fits them, so if something needs to change, the same team remakes it in days, not weeks. See how we cut to size in our factory.

A Fields Glass glazier cutting a sheet of glass on the cutting table in the Seven Hills factory

Frameless or Semi-Frameless? Choosing Your Glass Pool Fence

Glass pool fence systems, what you see, what each suits best and the Sydney price guide
SystemWhat you seeBest forSydney price guide*
Frameless on spigotsClear glass on small stainless spigots, no postsMost pools. Concrete, pavers or timber decking$275 to $600 per metre
Frameless in a channelGlass rising straight from the ground, no visible fixingsNew pools and landscaping, before paving goes downUpper end of the frameless range
Semi-framelessGlass between slim aluminium postsLonger runs and tighter budgets$200 to $275 per metre
Glass pool gateA matching glass gate with self-closing hinges and latchEvery system aboveQuoted per gate

*Sydney market ranges for supply and installation. Your quote depends on your site.

Frameless, Channel, Semi-Frameless and Glass Gates

Frameless Glass Pool Fencing on Spigots

This is the look most people picture: panels of toughened safety glass held on stainless steel spigots, with nothing between you and the water but glass. Spigots are core-drilled into concrete or fixed with base plates on decks and pavers. Panels are 12 mm toughened safety glass on 2205 marine-grade stainless spigots, in satin, mirror or matt black.

A Fields Glass glazier adjusting the fitting on a frameless glass pool fence panel in a backyard

Fully Frameless Glass Pool Fencing in a Channel

The glass sits in a channel set into the ground or slab, so there are no spigots at all. It is the cleanest finish available, and it is easiest to plan before paving or concrete is laid. If your pool is still being built, talk to us early.

Semi-Frameless Glass Pool Fencing

Glass panels sit between slim aluminium posts. You keep almost all the view at a lower cost per metre, which suits long boundaries and sloping blocks.

Glass Pool Gates

Your gate is the part an inspector checks hardest. We make glass gates to match your fence and fit self-closing hinges and a self-latching latch, set to swing away from the pool with the latch release at the required height.

Two Fields Glass glaziers installing frameless glass pool fencing on a timber deck beside a pool

Building a deck or terrace next to the pool? We also make and install glass balustrades in the same glass, so the whole outdoor area matches.

NSW Pool Fencing Rules Your Fence Has to Meet

In NSW, every backyard pool and spa needs a child-resistant barrier under the Swimming Pools Act 1992, built to AS 1926.1. We design every fence to these requirements:

NSW pool barrier requirements under AS 1926.1
RuleRequirement
HeightAt least 1200 mm, measured from outside the pool area. Where a boundary fence forms part of the barrier, 1800 mm.
GapsNo more than 100 mm under the fence or between panels.
No climbing aidsNothing a child could use as a foothold within 900 mm of the top of the fence.
GatesMust self-close and self-latch from any position and open outwards, away from the pool.
Latch heightThe release sits at least 1500 mm above the ground.

The certificate. Your pool must be registered on the NSW Swimming Pool Register. A council or registered pool inspector issues the certificate of compliance, which is valid for three years. You need one, or a certificate of non-compliance, to sell your home, and a valid certificate of compliance to lease it. If you replace or change an older fence, the current standard applies, even if the old fence was exempt.

A Fields Glass glazier kneeling to clean a newly installed frameless glass pool fence beside a pool

How Much Does Glass Pool Fencing Cost in Sydney?

Glass pool fencing in Sydney typically costs $200 to $600 per metre installed. Semi-frameless sits at the lower end and frameless at the upper end, with channel systems above that. As a guide, a 20 metre frameless fence with one glass gate runs about $7,000 to $12,000.

Because the panels are made in our own factory, you pay for the glass your site needs, not the nearest stock size.

What moves your price:

  • System: semi-frameless, spigots or channel
  • Length and layout: corners, steps and slopes need more custom panels
  • Ground: core-drilling concrete, fixing to a deck or setting a channel
  • Gates: each gate adds hinges, a latch and a hinge panel
  • Finish: spigot and hardware finish, and marine-grade stainless near the coast

Pool Fence Installation in Sydney: Measure to Finished in a Week

  1. Tell us about your pool.

    Call or send the form with your suburb and a few photos. A rough length is useful too.

  2. We measure and quote.

    We check levels, ground type, boundaries and where the gate should go, then send you a written quote.

  3. Your glass is made in Seven Hills.

    Panels are cut, drilled for gates and hinges, and toughened in our factory.

  4. We install.

    Spigots or channel go in, the panels are set and levelled, and your gate is tuned to close and latch on its own.

  5. You book your inspection.

    Your fence is ready for your council or certifier to inspect for your compliance certificate.

Broken Glass Pool Fence Panel? We Make a Matching Replacement

If a panel in your existing glass pool fence is cracked, chipped or shattered, we cut and toughen a replacement to the same size and refit it. This service covers the glass only. If a hinge or latch has failed, you’ll need a pool fence hardware specialist.

A broken panel leaves your pool unsecured, so block off access until it is replaced. For broken glass that needs urgent attention, see emergency glass repair.

A Fields Glass glazier handling a freshly cut piece of glass in the Seven Hills factory

Glass Pool Fencing Across Sydney

From our factory in Seven Hills we install glass pool fencing across Western Sydney and the Hills District, including Seven Hills, Blacktown, Castle Hill, Parramatta, Kellyville, Baulkham Hills and Rouse Hill. Looking for pool fencing in Sydney outside these areas? Call us and we’ll tell you straight away if we can help.

Western Sydney and the Hills
Seven Hills, Blacktown, Parramatta, Westmead, Castle Hill, Baulkham Hills, Kellyville, Bella Vista, Toongabbie, Rouse Hill, Penrith, Merrylands and surrounding suburbs.
Sydney Metropolitan area
The Inner West, North Shore, Northern Beaches, South West Sydney, the Sutherland Shire and the Eastern Suburbs.
A blue Fields Glass ute with a glass rack parked outside the Fields Glass factory in Seven Hills

Get Your Glass Pool Fence Quote

Tell us your suburb and roughly how much fence you need. Photos help us quote faster.

Or call (02) 9680 1900.

  • Free, obligation-free quote. We measure on site and price the job before any work starts.
  • Less waiting on glass. Your glass is cut in our own Seven Hills factory, not ordered in.
  • Licensed glaziers, 35+ years. NSW licence 213531C, and one team from measure to install.

Get a Free Quote

Send us a few details and photos of the job, and we’ll get back to you with a quote.

Glass Pool Fencing FAQs

How high does a glass pool fence need to be in NSW?

A glass pool fence in NSW must be at least 1200 mm high, measured from the outside of the pool area. If a boundary fence forms part of the pool barrier, that section must be at least 1800 mm high.

Do I legally have to have a fence around my pool?

Yes. Under the NSW Swimming Pools Act 1992, every backyard pool and spa must have a child-resistant barrier, including above-ground and inflatable pools that hold more than 300 mm of water. Owners can be fined if the barrier doesn’t comply.

How much does glass pool fencing cost installed in Sydney?

Installed glass pool fencing in Sydney typically costs $200 to $600 per metre. Semi-frameless is the cheapest glass option and frameless the most expensive, with channel systems above that. A 20 metre frameless fence with one gate is roughly $7,000 to $12,000.

Is frameless or semi-frameless glass pool fencing better?

Frameless glass pool fencing gives the clearest view and the most modern look. Semi-frameless costs less per metre and suits long runs and sloping blocks. Both meet AS 1926.1 when they are installed correctly.

Can you install a glass fence around an existing pool?

Yes. Spigots can be core-drilled into existing concrete or fixed with base plates to pavers and timber decks. A channel system is easiest before new paving goes down.

What is the cheapest way to fence a pool?

Aluminium pool fencing is usually the cheapest compliant option. If you want glass, semi-frameless is the most affordable. Fields Glass installs glass pool fencing only.

Does a glass pool fence need to be earthed?

The glass doesn’t need earthing, but metal spigots, posts or channels close to the water may need to be bonded under the electrical wiring rules. Ask your pool builder or a licensed electrician to check.

Can I install a glass pool fence myself?

You can buy panels and hardware and install them yourself, but the finished fence still has to meet AS 1926.1 and pass inspection. Gate hinge and latch settings and gap sizes are where DIY fences most often fail.

Who issues a pool certificate of compliance in NSW?

Your local council or a registered pool inspector issues the certificate of compliance through the NSW Swimming Pool Register. It is valid for three years. You need one, or a certificate of non-compliance, to sell your home.

How long does glass pool fence installation take?

Fields Glass usually installs a glass pool fence within a week of measuring, because the glass is cut and toughened in our own Seven Hills factory.

How is a glass pool fence installed?

We mark out the fence line and gate position, core-drill stainless spigots into concrete or fix base plates to decks and pavers, then set each toughened panel and level it within the 100 mm gap limits. Finally we fit the gate hinges and latch and adjust them so the gate self-closes and self-latches.

Can you replace one broken glass pool fence panel?

Yes. Fields Glass makes a replacement panel to the same size, toughens it and fits it into your existing fence. We replace glass only, not hinges or latches.

How do you clean a glass pool fence?

Rinse it with fresh water and wipe it with a soft cloth and glass cleaner. Keep the gate hinges and latch clear of leaves and check every few months that the gate still closes and latches on its own.

Call 24/7Free quote