4.730+ Google reviewsRated 4.7 out of 5 from 30+ Google reviews

Glass Cut to Size in Sydney, Cut in Our Own Factory

Give us your measurements and we’ll take it from there. Every piece is cut, edged, drilled and, where needed, toughened in our own Seven Hills factory, so nothing gets sent out and your glass arrives ready to fit. From a single shelf to a full trade order, we deliver it to your door or our glaziers install it for you.

A Fields Glass glazier in cut-resistant gloves scoring a sheet of glass on the cutting table at the Seven Hills factory
  • Cut and toughened in Seven Hills
  • Delivered or installed
  • 35+ years in the trade
  • NSW licence 213531C
  • Fully insured, $20 million public liability
A Fields Glass glazier lifting a freshly cut piece of glass off the cutting table in the Seven Hills factory
Cut in Seven Hills

Fields Glass is a licensed Sydney glazier that cuts glass to size in its own factory at Seven Hills. We cut clear, toughened, laminated, frosted, low-iron and tinted glass, plus mirror, to your exact measurements. Then we finish the edges, drill any holes, and deliver it or install it for you.

Most cut-to-size suppliers stop at the cut. Because our cutting, edgework and toughening all happen under one roof, you get one quote, one order and one team responsible for your glass from start to finish.

Why Sydney Homes and Trades Order From Fields Glass

  • You deal with the factory, not a middleman. Cutting, edging, drilling and toughening all happen at our Seven Hills workshop. Nothing is sent out to a third party, so there are fewer handovers and fewer chances for a measurement to go astray.
  • 35+ years of cutting glass. We’ve cut everything from a single picture frame pane to full shopfit orders, so we know which glass suits which job and will tell you if what you’ve asked for won’t work.
  • Licensed and accountable. NSW licence 213531C. If a piece doesn’t fit, you’re talking to the people who cut it.
  • Delivered or installed. Have your glass delivered ready to fit, or have our glaziers measure and install it for you.
Three Fields Glass glaziers standing beside racks of glass sheets on the Seven Hills factory floor

Sydney Homes and Trades Trust Fields Glass

4.730+ Google reviewsRated 4.7 out of 5 from 30+ Google reviews
  • Quickly and easily got the job done. Very clean and tidy, very courteous and very much recommended for next time!

    Ashraf PirwaniGoogle review
  • Fields Glass have been doing our work for 15+ years with a wide range of different glass work, best in the business! Wouldn’t use anyone else!

    Evan GrahamGoogle review
  • Very happy with the service and prompt turn around. Brett was friendly, professional and efficient. Very satisfied with the job he did. Overall highly recommended.

    Suzanne TraceyGoogle review

What Can We Cut to Size for You?

Tell us what the glass is for and we’ll match the type, thickness and edge finish to the job.

Glass Table Tops and Table Protectors

Protect a timber dining table or replace a broken coffee table top. Rectangular, round or with radius corners, in clear or low-iron glass with polished edges. Freestanding tops are cut from toughened glass for strength and safety.

Glass Shelves Cut to Size

Shelves for display cabinets, bathroom niches, bookcases and shop displays. We’ll recommend a thickness based on the span and what’s going on the shelf, and polish the edges so they look finished and are safe to handle.

Cabinet, Door and Furniture Glass

Replacement glass for kitchen cabinet doors, china cabinets, wardrobe doors, entertainment units and antique furniture. Clear, frosted, tinted or low-iron to suit the piece.

Picture Frame Glass

Thin, clear picture glass cut to fit your frame, whether it’s a single print or a gallery wall.

Window Panes and Replacement Panels

If you’re fitting it yourself, we’ll cut a pane to your measurements. If you’d rather we measure and fit it, see our glass replacement service.

Splashback and Benchtop Panels

Panels cut with power point and switch cutouts in place. For back-painted colour splashbacks, see glass splashbacks.

Mirror Cut to Size

We cut mirror to size for wardrobe doors, dressing tables, bathroom vanities, home gyms and feature walls. Choose standard silver or a tinted mirror in grey or bronze, with a polished or bevelled edge and holes for fixings, taps or power points.

Need a mirror designed and installed rather than supplied? See our custom mirrors service.

A Fields Glass glazier scoring a sheet of glass on the cutting table in the Seven Hills factory

Glass Types We Cut to Size

  • Clear float glass: the everyday choice for picture frames, cabinet panels and protected surfaces.
  • Toughened safety glass: up to five times stronger than ordinary glass and breaks into small blunt pieces. Used for table tops, shelves, doors and anywhere people could knock into it.
  • Laminated safety glass: holds together if it breaks, thanks to a plastic interlayer. It also reduces noise and blocks most UV.
  • Frosted and translucent glass: privacy for bathroom cabinets, doors and screens while still letting light through.
  • Low-iron glass: ultra-clear, without the green tint you see on the edge of standard glass. Ideal for display cabinets and table tops where colour matters.
  • Tinted glass: grey or bronze for a softer look and less glare.
  • Mirror: silver and tinted, cut and edged to your size.
A Fields Glass glazier in ear muffs and safety glasses cutting a length of aluminium on a drop saw in the Seven Hills factory

Toughened Glass Cut to Size: Why the Order Matters

Toughened glass can’t be cut, drilled or edged once it’s toughened. Try, and the whole panel shatters. So every cut, hole and edge has to be finished first, then the glass goes through the toughening furnace.

That’s where having everything at the one factory pays off. Fields Glass cuts, edges, drills and toughens in house at Seven Hills, so your order doesn’t bounce between suppliers and the measurements stay with the people doing the work.

Two Fields Glass glaziers in hard hats guiding a large sheet of glass on the overhead crane while a third works the crane controls in the Seven Hills factory

Not sure whether your piece needs safety glass? Australian Standard AS 1288 requires safety glass in areas where people could fall or walk into it, such as doors, low windows and side panels. Tell us where the glass is going and we’ll tell you what it needs.

Edges, Holes and Cutouts

  • Arrised edge: sanded smooth so it’s safe to handle. Suits glass that sits inside a frame.
  • Flat polished edge: a clean, glossy edge for exposed glass like shelves and table tops.
  • Bevelled edge: an angled border, popular on mirrors and decorative pieces.
  • Holes and cutouts: for hinges, handles, fixings, taps, power points and cable holes in desks.
  • Shapes: rounds, ovals, radius corners and custom shapes cut from your template.
A Fields Glass glazier kneeling on a timber deck, tightening a stainless steel spigot that holds a frameless glass pool fence panel

How to Order Glass Cut to Size

  1. Send us your measurements.

    Width and height in millimetres, the glass type and thickness if you know them, the edge finish, and the position of any holes. A photo of where it’s going helps.

  2. Get your quote.

    Usually within one business day.

  3. We cut and finish it at our Seven Hills factory.

    Cutting, edging, drilling and, where needed, toughening.

  4. Delivered or installed.

    We deliver your glass ready to fit, or our glaziers install it for you.

Measuring Tips That Save a Remake

  • Measure in millimetres, not centimetres.
  • Measure the width and height in three places and give us the smallest.
  • Tell us whether you’ve measured the opening or the glass itself, and we’ll allow the right clearance.
  • For a round top, measure the diameter at its widest point.
  • For odd shapes, a cardboard template is the most accurate way to get a perfect fit.

Need it urgently? Ask about same-day cutting when you call.

A Fields Glass glazier checking measurements with a tape measure

Trade Accounts for Builders, Cabinet Makers and Shopfitters

If you order glass regularly, a trade account with Fields Glass gives you a single local factory for cut panels, shelves, mirror, toughened and laminated glass, with edgework and holes done before it leaves the workshop.

Two Fields Glass utes with glass racks parked in the loading bay at the Seven Hills factory

What Does Glass Cut to Size Cost?

Every piece is priced on what it takes to make it. The main factors are:

  • Glass type and thickness: toughened, laminated and low-iron cost more than clear float.
  • Size: larger panels use more glass and are harder to handle.
  • Edge finish: polished and bevelled edges cost more than an arrised edge.
  • Holes, cutouts and shapes: each one adds machining time.
  • Toughening or laminating: an extra process after cutting.
  • Quantity: multiple pieces in one order are cheaper per piece.
  • Delivery or installation: depending on location and access.

Send your measurements and you’ll get a firm price, not an estimate.

Got Your Measurements? Send Them Through.

Tell us the size, the glass and what it’s for, and Fields Glass will come back to you with a quote.

Or call (02) 9680 1900.

  • Free, obligation-free quote. We measure on site and price the job before any work starts.
  • Less waiting on glass. Your glass is cut in our own Seven Hills factory, not ordered in.
  • Licensed glaziers, 35+ years. NSW licence 213531C, and one team from measure to install.

Get a Free Quote

Send us a few details and photos of the job, and we’ll get back to you with a quote.

Glass Cut to Size FAQs

Does Bunnings cut glass to size?

No. Bunnings doesn’t offer a glass or mirror cutting service, and its own Workshop team points customers to a local glazier instead. Fields Glass cuts glass and mirror to size at its Seven Hills factory, including toughened glass, polished edges and holes.

How much does it cost to have glass cut to size?

The price of glass cut to size depends on the glass type, thickness, size, edge finish, any holes or cutouts, and whether it needs toughening. Clear float glass with an arrised edge is the most affordable option. Send Fields Glass your measurements for a firm quote.

Can toughened glass be cut to size?

Toughened glass can’t be cut after it’s toughened because it shatters. It has to be cut, edged and drilled first, then toughened. Fields Glass does all of these steps in house, so toughened glass is made to your exact size from the start.

Can a mirror be cut to size?

Yes. Mirror can be cut to any size or shape, with a polished or bevelled edge and holes for fixings or power points. Fields Glass cuts silver and tinted mirror to size for wardrobes, bathrooms, gyms and furniture.

How do I measure glass for cutting?

Measure the width and height in millimetres at three points and use the smallest figure. Say whether it’s the opening size or the glass size so the right clearance can be allowed. For irregular shapes, a cardboard template gives the most accurate fit.

How long does it take to get glass cut to size?

Same-day cutting is available for urgent orders. Toughened and laminated glass take longer because they go through extra processing after cutting.

What thickness glass do I need for a table top or shelf?

It depends on the span and the load. A glass top that sits on a timber table can be thinner, while a freestanding table top or a long shelf needs thicker toughened glass. Tell Fields Glass the size and use, and they’ll recommend the right thickness.

Do you deliver cut glass?

Yes. Fields Glass delivers cut glass across Sydney from its Seven Hills factory, or can install it for you.

Delivering Cut Glass Across Sydney

Fields Glass cuts every order at its factory in Seven Hills and delivers across Sydney, including Blacktown, Parramatta, Castle Hill, Baulkham Hills, the Hills District and Western Sydney.

Western Sydney and the Hills
Seven Hills, Blacktown, Parramatta, Westmead, Castle Hill, Baulkham Hills, Kellyville, Bella Vista, Toongabbie, Rouse Hill, Penrith, Merrylands and surrounding suburbs.
Sydney Metropolitan area
The Inner West, North Shore, Northern Beaches, South West Sydney, the Sutherland Shire and the Eastern Suburbs.
Two Fields Glass glaziers loading a sheet of glass onto the rack of a blue Fields Glass ute outside a warehouse roller door
Call 24/7Free quote